Assam Public Service Commission (APSC) Recruitment 2025: Assistant Engineer Posts under Public Health Engineering Department
Exciting Opportunity Alert! The Assam Public Service Commission (APSC) has released Advertisement No. 31/2025, dated 9th September 2025, for the recruitment of 50 Assistant Engineer posts (Civil/Mechanical/Chemical) under the Public Health Engineering (PHE) Department, Government of Assam. This direct recruitment drive invites applications from Indian citizens as defined in Articles 5 to 8 of the Constitution of India, offering a stable career with attractive pay and benefits.
Applications are open from 15 September 2025 to 15 October 2025. Apply online at https://apscrecruitment.in. Don’t miss this chance!
Key Highlights
Total Vacancies: 50 posts
Reservation Policy: Follows Assam Government rules, including horizontal reservations for Persons with Benchmark Disabilities (PwBD), Ex-Servicemen, and Women (RFW - Reserved for Women against total posts in cadre). Candidates from reserved categories must upload relevant certificates (e.g., PRC, EWS/SC/ST/OBC/MOBC certificates, Disability Certificate for PwBD).
Exam Centers: Preliminary/Screening Test will be held across 6 zones in Assam (details below).
Selection Process: Screening Test (OMR-based Objective Type) followed by Written Exam and Interview. Direct recruitment; no provisional appointment until final selection.
Category-Wise Vacancy Breakup
The vacancies are distributed across Civil, Mechanical, and Chemical engineering disciplines. Below is the official category-wise split (Unreserved/Open, OBC/MOBC, SC, STP, STH), along with reservations for PwBD, Ex-Servicemen, and RFW.
Notes on Reservations:
PwBD: 4% horizontal reservation; must produce UDID card with 40%+ benchmark disability certified by competent authority.
Ex-Servicemen: Must upload Ex-Servicemen Identity Card issued by Zila Sainik Welfare Office and Discharge Book.
RFW: Reserved for Women—specific slots integrated into the cadre total as per the table above. Women candidates from any category can claim if eligible.
APSC reserves the right to adjust zones or numbers based on applications.
Pay Scale and Allowances
Successful candidates will be placed in Pay Band-4 with other allowances as admissible to Assam State Government employees (time scale from 30% to 100% per month).
Eligibility Criteria
To apply, candidates must meet the following essentials:
Nationality & Residency:
Indian citizen as per Articles 5-8 of the Constitution of India.
Permanent resident of Assam (upload Permanent Resident Certificate (PRC) issued by Competent Authority for educational/employment purposes).
Educational Qualification:
B.E./B.Tech specifically in Civil/Mechanical/Chemical Engineering from an institute recognized by AICTE.
OR Part A & B of AMIE (India) in Civil/Mechanical/Chemical Engineering (enrolled on or before 31.05.2013).
Relevant semester mark sheets and provisional certificate to be uploaded.
Age Limit (as on 01-01-2025):
Minimum: 21 years; Maximum: 38 years.
Relaxations:
OBC/MOBC: +3 years (up to 41 years).
SC/ST: +5 years (up to 43 years).
Ex-Servicemen: Maximum 50 years for Unreserved; further +3 years for OBC/MOBC, +5 years for SC/ST.
PwBD: +10 years (irrespective of category, as per Govt. Memo No. ABP.144/95/121 dated 28.10.2015).
Age calculated based on Class-X/Class-XII Examination Admit Card/Date of Birth (DoB) as per recognized Board/Council. No other proof accepted.
Other:
For Government Employees: Upload No Objection Certificate (NOC) from current employer.
Small Family Norms: Declaration required (as per Notification No. ABP.6/2015/8 dated 09.09.2015).
Candidates must be in sound bodily health; medical examination may be required.
Application Process
Applications are online only—no offline mode accepted. Follow these steps:
Visit https://apscrecruitment.in and complete One Time Registration (OTR) with valid email and mobile.
Log in, read eligibility criteria, and upload required documents (e.g., Photo: 50-200 KB; Signature: 10-20 KB; Scanned in 200 DPI grayscale, not older than 3 months).
Pay the fee online (non-refundable; no fee for SC/ST/PwBD).
Submit and take a printout for records. No edits after submission—verify uploads before finalizing.
Application Fee Structure (inclusive of Processing Fee + SPV):
Important Dates:
Starting Date: 15-09-2025
Closing Date: 15-10-2025
Helplines: Email: cessc-apsc@nic.in; Phone: 1800-572-234 (10 AM-5 PM on working days). For GRAS issues: 1800-10-6868 (10 AM-6 PM).
Documents to Upload: PRC, Age/Educational proofs from OTR profile (update if needed), Caste/Disability/Ex-Servicemen certificates. All in PDF (max 4MB each).
Exam Zones
The Screening/Written Exam will be conducted in the following zones (APSC may adjust based on applications):
Probable Syllabus for 2025
Based on the previous year syllabi, the probable syllabus for the Screening Test (OMR-based Objective Type) at Bachelor Degree standard includes two papers: General Studies (Paper-I) and the respective engineering discipline (Paper-II). Below are the detailed syllabi:
Assistant Engineer (Civil)
Paper-I: General Studies
Current Events of National & International Importance.
History of India & History of Assam.
World Geography including India & Assam.
Indian Economy, Indian National Movement.
Mental Ability.
Role and Impact of Science and Technology in India.
Indian Polity, Political System in India.
Indian Culture.
Paper-II: Civil Engineering
Statics: Co-planar and multi-planar system, free body diagrams, centroid, second moment of plane figure and fundamental polygons, principle of virtual work suspension systems and centenary.
Dynamics: Units and Dimensions, Gravitational and absolute systems, MKS & S.I. Unit.
Kinematics: Rectilinear and Curvilinear motion, Relative motion, Instantaneous centre.
Kinetics: Mass moment of inertia, simple harmonic motion, momentum and impulse equations of motion of rigid body rotating about a fixed axis.
Strength of Materials: Homogeneous and isotropic media, stress and strain elastic constants, tension and compression in one direction riveted and welded joints, Compound Stresses, Principal stresses and principal strains, simple theories of failure. Bending moments and shear forced diagrams. Theory of bending, shear stresses distribution in cross section of beams. Deflection of beams. Analysis of laminated beams and non-prismatic structures. Theories of columns, middle-fourth rules. Three pinned arch analysis of simple frames, torsion of shafts combined bending direct and torsional stresses in shafts. Strain energy in elastic deformation, impact fatigue and creep.
Soil Mechanics: Origin of soils, classification void ratio, moisture content permeability, compaction. Seepage: Construction of flow nets. Determination of shear strength parameters for different drainage and stress conditions-Tri-axial, unconfined and direct shear tests. Earth pressure theories-Rankine's and Coulomb's analytical and graphical methods, stability of slopes. Soil consolidation- Terzaghi's theory for one dimensional consolidation, rate of settlement and ultimate settlement, effective stress pressure distribution in soils, soil stabilization. Foundations-Bearing capacity of footings, Piles, Wells, Sheet piles.
Fluid Mechanics: Properties of fluids. Fluid Statics: Pressure at a point, force on plane and curved surface, buoyancy and stability of floating and submerged bodies, dynamics of fluid flow, Laminar and turbulent flow, equation of continuity energy and momentum equations, Bernoulli's theorem. Flow vortices. Flow net. Fluid flow measurement.
Surveying: General principles, sign convention surveying instruments and their adjustment, recording of survey observations, plotting of maps reductions, errors and their adjustments. Measurement of distances of directions and heights, correction to measure length and barring, correction for local attractions, measurement of horizontal and vertical angles, levelling operations, refraction and curve corrections. Chain and compass survey, theodolite and tacheometric traversing, traverse computation; plane table survey, solution of two and three points problems, contour surveying, setting out directional grades & type of curves, setting out of curves and excavations for building foundations.
Assistant Engineer (Mechanical)
Paper-I: General Studies (Same as above)
Paper-II: Mechanical Engineering
Statics: Simple application of equilibrium equations.
Dynamics: Simple applications of equations of motion, simple harmonic motion, work-energy, power.
Theory of Machines: Simple examples of links and mechanism, Classification of gears, standard gear tooth profiles wheel types of governors, static(s) and dynamic balancing. Simple examples of vibration of bars, Whirling of shafts.
Mechanics of Solids: Stress strain, Hooke's Law, elastic moduli, bending moments and shearing force diagrams for beams, Simple bending and torsion of beams. Spring, Thin walled cylinders. Mechanical properties and material testing.
Manufacturing Science: Mechanics of metal cutting tool life economics of machining cutting, tool materials. Basic machining processes, types of machine tools, transfer lines, Shearing drawing spinning, rolling forging extrusion. Different types of casting and welding methods.
Production Management(s): Design and time study, motion, economy and work space design, operation and flow process charts, Product design and constant selection of manufacturing process, Break even analysis, Site Selection of equipment for job, Shop and Mass production, Dulling dispatching, Routing.
Thermodynamics: Heat, work and temperature, First and Second Laws of thermodynamics, Carnot Rankine, Otto and Diesel Cycles.
Fluid Mechanics: Hydrostatics, Continuity equation, Bernoulli's theorem, Flow through pipes, Discharge measurement, Laminar and Turbulent flow, Concept of boundary layer.
Heat Transfer: One dimensional steady, state conduction through walls and cylinders, Fins. Concepts of thermal boundary layer, Heat transfer coefficient, Combined heat transfer, Coefficient, Heat ex-changers.
Energy Conversion: Compression and spark ignition engines, Compressors. Fans and Blowers, Hydraulic pumps and turbines, Thermal turbo machines, Boilers, Flow of steam through nozzles, Layout of power plants.
Environmental Control: Refrigeration cycles, refrigeration equipment, its operation and maintenance. Important refrigerants, Psychometrics comfort, Cooling and dehumidification.
Assistant Engineer (Chemical)
Paper-I: General Studies (Same as above)
Paper-II: Chemical Engineering
Cement: Types, Portland cement and special types of cement.
Processes and Process Variables: Mass and volume, mole and molecular weight, choosing a basis, flow rate, chemical composition, density and specific gravity, concentration, pressure temperature.
Properties and Corrosion of Material: Electrical and magnetic properties of materials - chemical, thermal and technological properties of materials - corrosion, theories of corrosion - control and prevention of corrosion.
Metals: Engineering materials - Ferrous metals - Iron and steel, iron-carbon equilibrium diagram. Non-Ferrous metals and alloys - Aluminum, copper, zinc, lead, nickel and their alloys with special reference to the application in chemical industries.
Fluid Flow Phenomena: Velocity field, laminar flow, velocity gradient and rate of shear, Eddie viscosity, viscosity and momentum flux, shear stress field, Newtonian and non-Newtonian fluids, Bingham model, ostwald-de Waele model of non-Newtonian fluid, turbulent flow, Reynold's experiments, flow in boundary layer, laminar and turbulent flow in boundary layer, transition from laminar to turbulent flow- Reynold's number, boundary layer separation and wake formation.
Basic Equation of Fluid Flow: Stream lines and stream tubes, average velocity, mass velocity, integral equation of flow- Euler's equation of motion, momentum equation for one dimensional flow under steady state condition, the Bernoulli's equation, its application to pumps, blowers, turbines etc.
Flow of Incompressible Fluid in Conduits: Flow of incompressible fluids in pipes, boundary layer formation in straight tube, laminar flow of Newtonian fluids, Hagen-Poiseuille equation, laminar flow of non-Newtonian fluids, velocity distribution for turbulent flow, average velocity, relation between maximum and average velocity, application of dimensional analysis to fluid flow problems friction factor, pipe roughness, loss of head due to friction, bends, fittings etc.
Sedimentation: Gravitational sedimentation- Fine suspensions- Coarse suspensions - Solids flux in batch sedimentation - The Kynch theory of sedimentation - thicker, Centrifugal separation - behavior of liquids in centrifuge basket fluid pressure - sedimentation in a centrifugal field - separation of two immiscible liquids - centrifugal equipment.
Filtration: The theory of filtration - relation between thickness of cake and volume of filtrate-flow of liquid through the cloth-flow of filtrate through the cloth and cake combined, compressible filter cakes, Filtration practice, The leaf filter, rotary- blocking filtration, effect of particle sedimentation on filtration-delayed cake filtration-preliminary treatment of slurries before filtration-washing of filter cake, Filtration equipment. Filtration in a centrifuge, Filtration calculations.
Mixing and Agitation: Agitation of liquids - Purpose of agitation-agitation equipment-Impellers-Flow patterns in agitation vessels recirculation velocity gradients in agitated vessels-power correlations for specific impellers-effect of system geometry-calculation of power consumption.
Water Pollution:
General: Regulations on the discharge of industrial pollutants in water/threshold limits. Types of waste water, sources of pollutants, classification of pollutants. Site selection, sampling, preservation, water quality parameters and significance, monitoring, determination of iBOD and COD. Dissolved Oxygen balance in water, self purification of a water system (Critical deficit of a runoff).
Some fundamental aspects of microbiology as applied to pollution control.
Control of Water Pollution: Basic approach to solve the problem. Primary, secondary and tertiary treatment of waste water, clarification, sludge disposal.
Points to Note
Scrutiny: Eligibility verified at any stage; false claims lead to cancellation and possible debarment.
No TA/DA: For interviews.
Canvassing: Strictly prohibited—disqualifies candidates.
Results: Published on APSC website; no individual communication.
PwBD candidates must ensure 40%+ benchmark disability; Government service norms apply (no casual/daily wage basis).
Before filling the application form, candidates must note that the required certificates relating to age, caste, and minimum educational qualification will be fetched from the OTR profile. Candidates are to update the OTR profile if any additional documents are to be uploaded in support of the advertised post.
For full details, download the official notification from the APSC website https://apsc.nic.in.
This recruitment is a golden opportunity to contribute to Assam's water and sanitation projects. Prepare well, update your OTR profile, and apply soon! For queries, contact: Email: cessc-apsc@nic.in; Phone: 1800-572-234 (10 AM-5 PM on working days). Share this post to help fellow aspirants. #APSCRecruitment #AssamJobs #EngineeringJobs #GovtJobs2025
Official Notification: Download Here
Previous Year Question Papers: Download Here